01 - Machine
03 - Safety
27 - Maintenance Positions
01 - 13 9813/7900-2 01 - 13
27 - Maintenance Positions
Introduction .................................................... 01-13
Health and Safety .......................................... 01-14
Introduction
1. Park the machine on solid, level ground.
1.1. Push the hand throttle lever to the idle
position.
2. Lower the dozer to the ground.
3. Lower the excavator so the attachment is flat on
the ground.
Figure 2.
4. Stop the engine.
5. Discharge the hydraulic pressure.
Refer to: PIL 30-00-00.
6. Isolate the controls.
7. Disconnect the battery to prevent accidental
operation of the engine.
Refer to: PIL 33-03-00.
To Next Page
Loading...
