jcb 457 - Stalk Switch Functions; Cab Interior Light Switch

About the Product
Interior Switches
16 9821/3700-4 16
I = Slow
II = Fast
Windscreen Washer
Push the button to activate the windscreen washer. Allow the stalk to spring back to central position when
finished.
Horn
Push the button to activate the horn. Allow the stalk to spring back to central position when finished.
Headlights Flash
Lift the stalk upwards to flash the headlights. Allow the stalk to spring back to central position when finished.
Main Beam
When the road lights are switched on via main switch on console, push the stalk downwards to turn on the
main beam. Pull the stalk upwards to the central position to turn off main beam.
Figure 11.
C
B
E
A
F
D
G
A Backwards - Right turn B Forwards - Left turn
C Rotate - Wiper on and off D Horn
E Upwards - Headlights flash F Downwards - Main beam
G Windscreen washer
Cab Interior Light
Three position switch. Make sure the cab interior light is turned off when you intend to leave the machine for
a long period of time.
Position : 1 = Interior light and ambient light off
Position : 2 = Interior light operates when cab door open, ambient light comes on when side lights switched on
Position : 3 = Interior light comes on permanently