jcb 4CX User Manual

Introduction
Safety Labels
16 16
9811/5200-2
ISO-01A
817-70014-3
Part Number: 817/70014
Description: Warning. Read the
operator manual before you operate
the machine.
ISO-02B
817-70104-4
Part Number: 817/70104
Description: Crushing of whole body.
Install the maintenance strut before
you start maintenance work below a
raised attachment. Refer to Making
the Machine Safe (Routine
Maintenance Section).
ISO-04D
817-70042-2
Part Number: 817/70042
Description: Explosion hazard.
Remove the source of ignition. Refer
to Health and Safety, Battery
(Routine Maintenance Section).
ISO-05C
817-70012-2
Part Number: 817/70012
Description: Runover. Start the engine
from the operator seat only. Do not
short across the terminals.
ISO-06A
332-F5855-1
Part Number: 332-F5855
Description: Pressure hazard. Read
operators manual
ISO-06D
817-70005-3
Part Number: 817/70005
Description: Hot fluid under pressure.
Refer to Cooling System (Routine
Maintenance Section).
ISO-07B
817-70018-2
Part Number: 817/70018
Description: Crush hazard. Do not
operate the controls from outside of
the machine.
ISO-07D
817-70112-2
Part Number: 817/70112
Description: Crush hazard. Keep a
safe distance from the moving parts.

jcb 4CX Specifications

General

Brand	jcb
Model	4CX
Category	Compact Loader
Language	English