Need help?Do you have a question about the jcb JCB-CD20Li and is the answer not in the manual?
General| Type | Cordless Drill |
|---|---|
| Battery Voltage | 20V |
| Chuck Size | 10mm |
| Max Torque | 45Nm |
| Speed Settings | 2 |
| Power Source | Battery |
| Chuck Type | Keyless |
| Battery Type | Lithium-Ion |
| No Load Speed | 0-400/0-1500 RPM |
Keep work area clean, well-lit, and free of flammable substances. Keep children and bystanders away.
Match plugs to outlets, avoid earthed surfaces, do not expose to rain, do not abuse cords, use outdoor extension cords and RCDs.
Stay alert, use common sense, wear protective equipment, prevent unintentional starting, maintain balance, dress properly.
Use correct tool, do not use faulty switches, disconnect power before adjustments, store idle tools safely, maintain tools.
Recharge with specified charger, use designated battery packs, avoid short circuits, handle leaking battery fluid carefully.
Have tool serviced by qualified personnel, use identical replacement parts, replace cords by manufacturer.
Follow guidelines for charging, handling, storage, and disposal of battery packs and chargers.
Includes checking for hidden wiring, using auxiliary handles, wearing ear protection, and handling hot parts.
Symbols for manual reading, warnings, PPE, environmental use, and battery disposal.
Symbol indicating the recommended temperature range for charging the battery pack.
Identifies and labels key parts of the cordless combi drill.
Details weighted sound pressure and power levels, and recommends ear protection above 80dB.
Lists available accessories like battery packs, chargers, and bits for purchase.
The machine is designed for driving screws and drilling in wood, metal, and plastic.
Covers battery charging and removal/installation procedures before initial use.
Instructions for attaching and positioning the auxiliary handle for better control.
Explains the function of the ON/OFF switch, variable speed, and switch lock.
How to change drilling/driving direction and warnings about changing rotation while moving.
Explains how to select low or high speed for different drilling and driving tasks.
Guide on how to open, insert drill bit, and clamp the chuck jaws securely.
How to set the torque adjustment ring for different screw driving and drilling tasks.
How to use the spindle lock feature for screwdriver functionality.
How to activate the LED light for better visibility in low light conditions.
Guidance on drilling into hard surfaces, using center punches, and proper bit placement.
Proper methods for recycling or disposing of exhausted battery packs.
Explains how the tool's overload protection features work to prevent damage.
How temperature affects tool operation and overload protection.
How the tool protects the battery from deep discharge.
Troubleshooting steps if the drill does not respond when the switch is pressed.
Diagnosing why the drill stops prematurely during screw tightening.
Reasons for varied battery pack performance and working times.
Guidance on keeping the tool clean, dry, and free from dust for optimal performance.
Instructions for responsible disposal of waste electrical products and recycling advice.
Outlines conditions not covered by the 5-year guarantee, including misuse and wear.
How to make a warranty claim and requirements like proof of purchase.
Details the terms of the guarantee, including statutory rights and registration.
Declares product compliance with EC directives and lists conforming standards.
To Next Page