JCM GLOBAL DT-300 Series User Manual

© 2013, Japan CashMachine Co., Limited
Support: http://www.jcmglobal.com/en/contact/default.aspx Web-Site: http://www.jcmglobal.com
Issue #4033-IGE-01-01
DT-300
™
Series
Download Tool
Operator Integration Guide
Revision 1, April 1, 2013
P/N 960-000167R_Rev. 1 {EDP #214645}

JCM GLOBAL DT-300 Series Specifications

General

Brand	JCM GLOBAL
Model	DT-300 Series
Category	Tools
Language	English

Summary

2 COMPONENT NAMES

3 PRIMARY FEATURES

4 PRECAUTIONS

User Safety and Handling Guidelines

Essential safety guidelines for operating and handling the DT-300 device to prevent damage and ensure user safety.

5 SPECIFICATIONS

Technical Specifications

6 INSTALLATION

Battery Installation

Step-by-step instructions for installing AAA batteries into the DT-300 device.

SD Card Installation

Procedure for installing the SD card into a PC or card reader.

DIP Switch Settings

Device Functions and Modes

USB Cable Connection and Authentication

MainApplication Operation Procedures

Guide to performing operations within the DT-300's MainApplication mode, covering various functions.

OPERATION PROCEDURES (BOOTLOADER)

DT-300 Firmware Update

Procedure for updating the DT-300 device's firmware using the Bootloader mode.

DT-300 EEPROM Update

Procedure for updating the DT-300 device's EEPROM data using the Bootloader mode.

POWER MANAGEMENT

Battery Charge Level Monitoring

SOFTWARE DATA FILES

RECEIVED LOG FILES

FIRMWARE AND EEPROM FILES

CONNECTOR PIN ASSIGNMENTS

DT-300 USB Type "A" Pin Assignments

9 COMPATIBILITY

DT-300 Compatible Validators

10 ERROR CODES

Bootloader Error Codes

List and descriptions of error codes that may occur during the DT-300's Bootloader operation.

MainApplication Error Codes

List and descriptions of error codes that may occur during the DT-300's MainApplication operation.

12 TECHNICAL CONTACT INFORMATION