To Next PageTo Next Page
Need help?Do you have a question about the JCM GLOBAL VEGA 100 and is the answer not in the manual?
General| Hopper Capacity | 500 notes |
|---|---|
| Stacker Capacity | 200 notes |
| Power Supply | AC 100-240V, 50/60Hz |
| Display | LCD |
| Detection Features | Double Note, Chain Note, Half Note |
| Power Consumption | 50W |
| Note Size | 50 x 90 mm to 90 x 186 mm |
Illustrates and describes a typical VEGA Currency Validation Unit.
Details the VEGA unit's features including configuration, sensors, cash box sizes, and banknote acceptance.
Lists essential safety guidelines for installing, operating, and servicing the VEGA Unit.
Identifies and illustrates the names and locations of various VEGA unit components.
Provides step-by-step instructions for installing the VEGA SH Unit into a host machine.
Provides step-by-step instructions for installing the VEGA SU/SD Unit into a host machine.
Details further steps for mounting the VEGA SD/SU Bracket and securing the Cash Box.
Final step to power on the VEGA Unit, concluding the SU/SD installation procedure.
Explains the function and location of the three DIP Switch Blocks (DS1, DS2, DS3) on the VEGA Unit.
Tests the functionality of DIP switches and the feed motor's forward rotation.
Procedures to test the feed motor's reverse rotation and the stacker motor.
Tests the VEGA's feeding, transporting, stacking functions, and verifies sensor functionality.
Details the DS2 switch settings for sensor testing and expected LED states.
Procedure to download VEGA Operating Software Program, including tool requirements and setup.
Steps for selecting the VEGA software file and initiating the download process via UBA Downloader.
Details post-download checks, CRC verification, and handling of manual reset or errors.
Procedure for calibrating Entrance, Validation, and Edge Sensors without a PC.
Completes sensor adjustments, including validation with paper and EEPROM data writing.
Procedure to perform the VEGA's Off-Line Banknote Acceptance Test.
Area for writing pertinent notes or comments regarding your particular installation.
