1 - 4
CHAPTER 1 Product Name & Product Specifications
EBA-3X-SD3 provides the following features:
3-1 Automatic centering
Automatic centering mechanism allows the unit to read bills ranging from 62mm to 85mm without
using bill guides (side blocks). Bill acceptance rate and security against counterfeits have been
greatly improved.
3-2 Automatic Re-validation
The EBA-3x series features automatic re-validation. The unit attempts to accept bill three times in
total, if the bill is rejected in the first insertion.
3-3 Dip switch settings to accept/reject bills
Accept/reject of each denomination is DIP switch selectable.
3-4 Easy bill retrieval
The stacker box can be detached from the stacker unit to withdraw deposited bills.
3. Features
The standard SD3 stacker box stores up to 400 bills.
The stacker box is equipped with a coin lock for higher security.
To Next Page
Loading...
Need help?
General
