JCM EBA-30-SD3 User Manual

Issue 01/2006
Contents
Product Name & Specifications
1. Product Name
2. Precautions
3. Features
4. Component Names
5. General Specifications
6. Retrieving Bills
7. Cabling
8. Outside Dimensions
9. Country Codes
Bill Acceptor
EBA-30/31-SD3(EBA-30/31)
EBA-32/33-SD3(EBA-32/33)
EBA-34/35-SD3(EBA-34/35)
CHAPTER 1
Copyright © 1998 Japan Cash Machine Co.Ltd. All rights reserved.

JCM EBA-30-SD3 Specifications

General

Model	EBA-30-SD3
Manufacturer	JCM
Type	Bill Acceptor
Interface	Serial
Power Supply	12V DC
Acceptance Rate	98% or greater

Summary

Chapter 1: Product Name and Specifications

Product Name Identification

Details the naming convention for EBA products and their components, including model and type.

Precautions for Use

Outlines essential safety and handling guidelines for the bill acceptor unit.

General Specifications

Chapter 2: Operations and Maintenance

Installation Guide

Interface Options Overview

Outlines the available communication interfaces (ID-003, MDB, ccTalk, HII).

DIP Switch Configuration

Explains the function and settings of DIP switches for operational configuration.

Clearing Bill Jams

Provides clear instructions on how to remove jammed bills from the unit.

Cleaning and Preventive Maintenance

Details procedures for cleaning and maintaining the unit's performance.

Chapter 6: Troubleshooting

Bill Acceptance Test Procedure

Error Classification (Malfunction/Rejection)

Categorizes errors based on LED blinking patterns and their meanings.

Troubleshooting Common Issues

Provides systematic steps to diagnose and resolve common operational issues.

Chapter 7: Calibration, Download, Diagnostics

Calibration Procedures

Details the procedures for calibrating optical and magnetic sensors.

Downloading Software to Flash Memory

Guides on updating the unit's firmware via flash memory using PC.

Diagnostic Tests