JDS Uniphase SB Series - Operating and Maintenance Instructions; Front and Rear Panel Operations

Operating and Maintenance Instructions – 15
Operating and Maintenance Instructions
Front Panel
The front of the switch is shown in Figure 7.
Figure 7: Front of the Switch
Operating Keys
The operating keys are described in Table 5.
Table 5: Operating Keys
Key Description
I / O
Turns the power on (I) and off (O)
DRIVER 1 Toggles driver 1 on and off
GPIB ADDR Sets the switch to GPIB Address (IEEE 488.1) mode
LOCAL Returns the switch to Local mode from Remote mode
▲
Channel increment key
▼
Channel decrement key
Status LEDs
The status LEDs are described in Table 6.