JDW KR434 - Operation and Food Preparation; Preparing the Unit; Connecting the Unit; Preparing Foods

6
Preparing the unit:
Before using the unit for the first time, carefully clean the unit and
lid.
Do not use any aggressive detergents, brushes with metal or nylon
bristles or sharp objects such as knives or spatulas for cleaning the
unit. Avoid damaging the non-stick coating. Always dry the unit
throughly after cleaning it.
Connecting the unit:
1. Connect the temperature connector to the base of the basic unit.
Make sure that the plug is connected properly.
2 Set the temperature selector switch to heat level "0".
3. Connect the plug to a 220-240V socket-outlet.
Preparing foods:
1. Brush the heating plate with a little cooking oil.
2. Set the temperature regulator to the required heat level. The
control lamp will light up to signal that the unit is ready for use
(ON).
Heating levels
Temperature
Food type
1 & 2
100-150 C°
Roasted food, meat, etc.
3 & 4
150-200 C°
Pancakes, scrambled eggs,
bacon, etc.
5
About 240 C°
Paned meat etc.