Jebao DC-6000 User Manual

DC-6000, DC-9000, DC-12000
These variable speed pumps are designed to be ultra quiet for submerged
pump applications.
Before installing and using the pump, please read through these
instructions to familiarise yourself with the correct operation of the device.
Features:
• DC-6000 (30W) Maximum flow rate of up to 6,000 litres/hour
• DC-9000 (70W) Maximum flow rate of up to 9,000 litres/hour
• DC-12000 (80W) Maximum flow rate of up to 12,000 litres/hour
• High performance motor with innovative electronics resulting in
power savings up to 65%
• Ultra quiet
• Electronic detection of no water enables automatic power off
protection
• Motor protection if rotor is blocked
• Can be used in Marine and Freshwater applications
• No copper elements
• Long operation life is achieved by the use of wear resistant ceramic
shaft
• Soft start operation - pump gradually builds up to set flow rate
• Feed mode disables pump for 10 minutes
• 6 speed settings - 100%, 90%, 85%, 80%, 70% and 60% - setting is
retained if power is lost.
• Unique multi mode controller to allow adjustment of the pump to
suit the users requirements.
Package Contents:
• Pump
• Intelligent controller
• AC/DC adapter
• Mains power cord
• Tube connectors:
• DC-6000 & DC-9000: 31mm, 25mm & 20mm
• DC-12000: 39mm, 32mm, 25mm & 20mm

Jebao DC-6000 Specifications

General

Brand	Jebao
Model	DC-6000
Category	Water Pump
Language	English

Summary

Important Information

Pump Operation

Operate the pump only in water for optimal performance. Ensure the controller is not exposed to water.

Warranty and Usage

Warranty is void if controller or adapter are opened. Pump is suitable for indoor use in water only.

Installation Guide

Tubing Connection

Connect the pump to desired input and output tubing, ensuring secure connections.

Controller Mounting

Attach controller to rear of controller with adhesive paper, then affix in a suitable location.

Power Connection

Connect waterproof connector from pump to controller, then AC/DC adapter, before mains power.

Controller Operation

Speed Settings

The controller offers six speed settings (100% to 60%) retained if power is lost.

Feed Mode

Disables pump for 10 minutes via 'FEED' button; press again to restart early.