Jebao RW4 User Manual

Wireless Controller for Wave Maker
User’s Manual
Matched Models, RW4/8/15/20 and WP10/25/40/60
Company：Jebao(Zhongshan)Electrical Appliance Co.Ltd
Address：Tongmao Industrial Park, Dongsheng Town, Zhongshan city.
Guangdong Pro. China
Tel.: +86-760-28136717/20/21 Fax: +86-760-28136725
E-Mail: info@jebao.com Website: www.jebao.com
Jebao wave makers are intended to simulate the natural waves and
whirlpools found in a marine environment.
Before installing and using the controller, please read through these
instructions to familiarise yourself with the correct operation of the device.
Features:
1. Unique wireless multi- mode controller to allow adjustment of the
wave maker to suit the users requirements.
2. Use of low-voltage, low power, DC variable-speed pump for safe
operation.
3. Easy adjustment & operation.
4. Wireless communication with other Wireless Controllers
Installation Instructions:
1. Accessories: Intelligent controller, power adaptor, mains cable, double
sided tape, instruction manual.
2. Assembly: Remove one side of the double-sided tape and stick to the
rear of the controller. Remove the other side of the double-sided tape and
affix the controller in a suitable location.
3. Attach the 3-pin waterproof connector from the pump to the controller.
Then attach the DC plug to the controller. And attach the AC cable of the
adaptor.

Jebao RW4 Specifications

General

Controller Type	Wireless
Type	Wave Maker
Control Modes	Feed
Flow Rate	4000 l/h
Voltage	24V
Modes	Feed

Summary

Product Introduction and Setup

Product Features

Lists the key characteristics and capabilities of the wireless controller.

Installation Instructions

Provides step-by-step instructions for setting up the controller and connecting the pump.

Operation and Functionality

Controller Button Functions

Explains the purpose and operation of the controller's buttons and dial for mode selection and speed adjustment.

Wavemaker Modes

Details various operational modes including Wave, Sine, Random, Constant Flow, and Anti Sync.

Special Operational Functions

Describes specific modes such as Night Mode, Feed Mode, and the Dial Locking Function.

Warnings and Appendix

Safety Warnings

Advises on handling the controller safely, avoiding moisture, and proper usage.

Typical Pump Locations

Illustrates common placement scenarios for wavemakers within an aquarium.