To Vary The Speed Setting
While ACC is set, you can increase the set speed by
pressing the SET + button.
Pressing the SET + button once will result ina1mph
(1 km/h) increase in set speed. Each subsequent tap of
the button results in an increase of 1 mph (1 km/h).
If the SET + button is continually pressed, the set speed
will continue to increase in 5 mph (10 km/h) increments
until the button is released. The increase in set speed is
reflected in the EVIC display.
While ACC is set, the set speed can be decreased by
pressing the SET - button.
Pressing the SET - button once will result ina1mph
(1 km/h) decrease in set speed. Each subsequent tap of
the button results in a decrease of 1 mph (1 km/h).
If the SET - button is continually pressed, the set speed
will continue to decrease in 5 mph (10 km/h) increments
until the button is released. The decrease in set speed is
reflected in the EVIC display.
NOTE:
• When you override and push the SET + button or SET
- buttons, the new Set Speed will be the current speed
of the vehicle.
• When you use the SET - button to decelerate, if the
engine’s braking power does not slow the vehicle
sufficiently to reach the set speed, the brake system
will automatically slow the vehicle.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197
To Next Page
Loading...
