Get Started
All you need to control your Uconnect system
with your voice are the buttons on your steering
wheel.
1. Visit UconnectPhone.com to check mobile
device and feature compatibility and to find
phone pairing instructions.
2. Reduce background noise. Wind and pas-
senger conversations are examples of noise
that may impact recognition.
3. Speak clearly at a normal pace and volume
while facing straight ahead. The microphone
is positioned on the rearview mirror and
aimed at the driver.
4. Each time you give a Voice Command, you
must first push either the Voice Recognition
(VR) or Phone button, wait until after the
beep, then say your Voice Command.
5. You can interrupt the help message or sys-
tem prompts by pushing the VR or Phone
button and saying a Voice Command from
current category.
Basic Voice Commands
The basic Voice Commands below can be given
at any point while using your Uconnect system.
Push the VR button . After the beep, say:
• “Cancel” to stop a current voice session
• “Help” to hear a list of suggested Voice
Commands
• “Repeat” to listen to the system prompts
again
Notice the visual cues that inform you of your
voice recognition system’s status. Cues appear
on the touchscreen.
Radio
Use your voice to quickly get to the AM or FM
stations you would like to hear.
Push the VR button . After the beep, say:
• “Tune to ninety-five-point-five FM”
TIP: At any time, if you are not sure of what to
say or want to learn a Voice Command, push the
VR button and say “Help.” The system will
provide you with a list of commands.
Uconnect Voice Command Buttons — If
Equipped
1 — Push To Initiate Or To Answer A Phone Call,
Send Or Receive A Text
2 — For All Radios: Push To Begin Radio Or Me-
dia Functions. For 8.4-inch Displays Only: Push To
Begin Navigation, Apps And Climate Functions.
3 — Push To End Call
Uconnect 3 Radio
318
To Next Page
Loading...
