EasyManua.ls Logo

Jeep Compass 2019 - To Manually Turn off the Stop;Start System; To Manually Turn on the Stop;Start System; Speed Control - if Equipped

Jeep Compass 2019
284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To Manually Turn Off The Stop/Start System
1. Push the STOP/START Off switch (located
on the switch bank). The light on the
switch will illuminate.
2. T
he “STOP/START OFF” message will ap-
pear in instrument cluster display. Refer to
“Instrument Cluster Display” in “Getting To
Know Your Instrument Panel” in your Own-
er’s Manual for further information.
3. At the next vehicle stop (after turning off
the STOP/START system) the engine will
not be stopped.
4. The STOP/START system will reset itself
back to an ON condition every time the
ignition is turned off and back on.
To Manually Turn On The Stop/Start
System
Push the STOP/START OFF switch (located
on the switch bank). The light on the switch
will turn off.
For complete details on the Stop/Start Sys-
tem refer to the “Stop/Start System” in the
“Starting And Operating” section located in
your Owner’s Manual for further information.
SPEED CONTROL IF
EQUIPPED
When engaged, the Speed Control takes over
accelerator operations at speeds greater than
25 mph (40 km/h).
The Speed Control buttons are located on the
right side of the steering wheel.
STOP/START OFF Switch
Speed Control Switches
1 Push Cancel
2 Push Set (+)/Accel
3 Push Resume
4 Push On/Off
5 Push Set (-)/Decel
147

Table of Contents