5. Replace the bulb as necessary by turning and removing
the bulb housing.
6. Insert the new bulb, making sure it is properly locked.
7. Reposition the rear body side lamp assembly on the car.
8. Reconnect the electrical connector.
9. Reinstall the body side lamp making sure to align the
ball studs.
Body Side Tail Lamp
1 — Rear Body Side Tail Lamp
2 — Ball Stud
Reverse Side of Tail Lamp
1 — Direction Indicator Bulb / Stop Lamp Bulb
2 — Electrical Connector
3 — Ball Studs
7
IN CASE OF EMERGENCY 309
To Next Page
Loading...
