10. Install fasteners and tighten body side lamp assembly.
11. Finally close the tailgate.
Reverse Lamps
1. Open the liftgate.
2. Using a suitable tool remove the access panel for body
side lamps, remove lift gate access cover for lift gate
lamps.
3. Disconnect the electrical connector by pushing the re-
lease.
4. Remove bulb and replace making sure it is properly
locked.
5. Reconnect the electrical connector.
Body Side Tail Lamp
1 — Rear Body Side Tail Lamp
2 — Ball Stud
Liftgate
1 — Lift Gate Access Covers
310 IN CASE OF EMERGENCY
To Next Page
Loading...
