TECHNICAL SPECIFICATIONS 419
ENGINE FLUIDS AND LUBRICANTS
Component Fluid, Lubricant, or Genuine Part
Engine Coolant
We recommend you use Mopar® Antifreeze/Coolant 10 Year/
150,000 Mile (240,000 km) Formula OAT (Organic Additive Technology)
or equivalent meeting the requirements of the manufacturer Material
Standard MS.90032.
Engine Oil – 1.3L Turbo Engine
We recommend you use SAE 0W-30 SN PLUS API Certified Synthetic
Engine Oil, meeting the requirements of the manufacturer Material
Standard MS-13340 such as Mopar®, Pennzoil, and Shell Helix.
Refer to your engine oil filler cap for correct SAE grade.
Engine Oil – 2.4L Engine
We recommend you use SAE 0W-20 API Certified Engine Oil, meeting the
requirements of the manufacturer Material Standard MS-6395 such as
Mopar®, Pennzoil, and Shell Helix. Refer to your engine oil filler cap for
correct SAE grade.
Engine Oil Filter We recommend you use a Mopar® Engine Oil Filter.
Fuel Selection – 1.3L Turbo Engine 87 Octane (R+M)/2 Method, 0–15% ethanol
Fuel Selection – 2.4L Engine 87 Octane (R+M)/2 Method, 0-15% ethanol
9
21_BV_OM_EN_USC_t.book Page 419
To Next Page