80 GETTING TO KNOW YOUR INSTRUMENT PANEL
NOTE:
Some items may be displayed and managed
through the Uconnect system.
Vehicles Equipped With Multi-functional Display
Reconfigurable:
The following menu/submenu items are
available in the cluster display.
“Vehicle Shut Off (If Equipped)”
By selecting the item “Vehicle Shut Off”, you can
turn off the engine from the instrument cluster.
This feature is available in the event of an
ignition switch failure, and will display
instructions for turning off the engine via the
instrument cluster display controls.
“Display”
By selecting the “Display,” you can access the
following setting:
Language: allows you to select the language
in which to display the information/warnings.
“Units Of Measure”
By selecting the item “Units of Measure,” you
can select the unit of measure to use for
displaying various magnitudes.
Possible options are:
US
Metric
Custom
“Clock & Date”
By selecting the item, “Clock & Date” you can
adjust the clock.
Possible options are:
Set Time: adjust hours/minutes
Set Format: adjust the time format “12h”
(12 hours) or “24h” (24 hours)
Set Date: adjust day/month/year
“Security”
By selecting the item “Security,” you can make
the following adjustments:
Speed Warning:
Set the vehicle speed limit, which the driver is
notified through a visual and acoustic
signaling (display of a message and a symbol
on the display).
When the speed warning is set, the icon
should remain visualized for the same dura-
tion time of the pop up. If the driver exceeded
the set speed, the icon should remain for
however long the vehicle is over the set
speed.
Driver may also turn the Speed Warning
“OFF” should you choose not to use this
feature.
21_BV_OM_EN_USC_t.book Page 80
To Next Page