Need help?Do you have a question about the Jeio tech OF-02G and is the answer not in the manual?
General| Model | OF-02G |
|---|---|
| Category | Convection Oven |
| Capacity | 91 liters |
| Temperature Range | Ambient +5°C to 250°C |
| Timer | 99 hr 59 min |
| Material | Stainless Steel |
| Voltage | 220V |
| Frequency | 50/60 Hz |
| Controller | Digital PID Controller |
| Shelves Included | 2 |
| Power | 1200 W |
| Temperature Accuracy @100°C | ±1.0°C |
| Heater Capacity | 1200 W |
Danger means serious damage or death from wrong handling.
Warning means serious damage from wrong handling.
Caution means not so serious damage or physical damage to unit.
Describes the uses of the forced convection oven for various tests.
Details the unique features and design of the forced convection oven.
Lists the items included with the main unit.
Provides guidelines for safe and proper unit placement and environment.
Advises on safe practices and what to avoid during operation and cleaning.
Warning against placing explosive and flammable materials inside the chamber.
Details the construction and material of the main unit's exterior.
Describes the door assembly, including handle, window, and packing.
Details the chamber, blower, heater, and temperature sensor.
Explains the temperature controller, limit, panel, switch, and fuse.
Details the RS-232C port and power cord functions.
Explains the safety function of the door limit switch.
Details the CLS-Control System's safety features and operation.
Identifies the LEDs on the controller and their functions.
Identifies the buttons on the controller and their general functions.
Explains the functions of Temp., Timer, Start/Stop, Lock, and Auto Tune buttons.
Describes the SV and PV displays for set and present temperature.
Step-by-step guide on how to set the temperature using the TEMP button.
Explains storing favorite temperature values (Sv1, Sv2, Sv3).
Describes how to vary the temperature unit between °C and °F.
Instructions on setting the On Timer and Off Timer functions.
Explains Wait On Timer, Wait Off Timer, and their combined function.
Describes how to deactivate the timer function.
Explains selecting unit state after power failure using the Timer button.
Guide to performing Auto Tuning and locking controller buttons.
Step-by-step instructions for cleaning the unit safely.
Safety precautions when dealing with harmful substances during cleaning.
Initial checks to perform when the unit is not working.
Troubleshooting guide for common malfunctions and their solutions.
Details the warranty period and contact information for service.
Lists conditions and damages not covered by the warranty service.
Guide on how to install the Lab Tracer software from the CD.
Lists the standard and recommended system requirements for Lab Tracer.
Steps to establish communication between the PC and the equipment.
How to view actual temperature, set point, and heating output graph.
How to view operating status, auto tune, program, and other parameters.
Explains how to interpret the data shown in Graph and Status interfaces.
Details parameter values like PV, SV, and Heat output.
Explains the functions of various icons in the Lab Tracer software menu.
Describes view options, panel control, and printing functionality.
Guide on how to print the displayed data and graphs.
Details print range, copies, interval, memo, and printer selection.
Explains previewing, point deletion, and zoom during printing.
Covers graph editing like point deletion and zoom.
Explains display panel control and pattern program setup.
Details the pattern program window and how to input steps.
Explains editing temperature and time using keyboard shortcuts.
Describes navigation and editing points in a pattern.
Instructions for saving and opening programmed patterns.
How to start the unit operation after setting the pattern.
Explains pattern repetition, data deletion, and cautions.
Important cautions regarding operating time and equipment performance.
To Next Page
