Introduction 7
• Do not spill fluid over the machine. If fluid is spilled, disconnect the
machine from power and clean with a damp cloth. If fluid is spilled onto
electronic parts, contact an approved JEM/Martin dealer for advice.
• Do not dismantle or attempt to repair a faulty machine. Refer all service
to an authorized JEM/Martin service dealer.
• Do not operate the machine if the power cable or connector is
damaged. A damaged cable or connector must be replaced with a new
item, available from your JEM/Martin dealer.
• Do not operate the machine with damaged, deformed or missing parts.
Preventing burns and fire
• Ensure that airflow around the machine is free and unobstructed.
• Do not operate the machine if the ambient temperature (T
a
) exceeds
55° C (131° F).
Preventing injurie s
• Never allow any object or part of your body to enter the path of the fan
blades, and ensure that clothing, cables or other items cannot be
sucked into the fan.
• Disconnect the fan from power before removing any cover or grill. Do
not operate the fan unless all covers and grills are installed and
securely fastened.
• Ensure that the supporting structure or surface can hold at least 10
times the weight of all installed devices.
• Use an approved means of secondary attachment such as a safety
cable.
• Work from a stable platform and block access below the work area
when installing, servicing or removing the machine.
U n p a c k i n g
AF-1 and AF-2 fans are supplied with:
• Remote control unit with 5 meter (16.5 ft) cable with XLR connector
• Power cable
• User manual
• Adjustable flying bracket
To Next Page
Loading...