3
I. GENERAL INTRODUCTION
The Jenco Model 6308PT (pH and Temperature) System is a rugged
microprocessor based instrument assembled in a watertight ¼ DIN
case, designed for use in laboratories and process control
applications.
The model 6308PT microprocessor allows the user to easily
recalibrate the parameters for the probes. The microprocessor also
performs a self-diagnostic routine every time you turn on the unit
providing you with basic information about the stability of the
instrument.
The system simultaneously displays pH, Temperature, Alarm status
and current output in one LCD graphic screen. The LCD also
includes a backlight for dark environments. This system uses glass
electrode for the pH and a precise thermistor for temperature
providing you with accurate readings for all your measurements.
The model 6308 PT is equipped with 5 relays (2 active Low and 2
active High relays for pH and one programmable high or low relay
for temperature); all relays are hysteresis driven and configurable to
CENTER or EDGE mode. The system also has a isolated 4-20mA
analog output, offset and span configurable for the pH display.
The model 6308 PT comes with a RS485 interface that can easily let
the user log all data (from multiple model 6308) with an IBM
©
PC/AT compatible computer.
To Next Page
Loading...