Need help?Do you have a question about the Jenn-Air JDB3600AWS4 and is the answer not in the manual?
General| Type | Built-In |
|---|---|
| Place Settings | 14 |
| Noise Level | Quiet |
| Number of Wash Cycles | 6 |
| Drying System | Heated Dry |
| Control Type | Electronic |
| Energy Star Certified | Yes |
| Number of Options | 6 |
| Number of Racks | 2 |
| Third Rack | No |
| Soil Sensor | Yes |
| Stainless Steel Tub | Yes |
| Delay Start | Yes |
| Heated Dry | Yes |
| Width | 23.875 in |
| Height | 34.5 in |
| Depth | 24 in |
| Wash Cycles | Normal, Heavy, Light, Rinse Only |
Lists necessary tools and parts for installation.
Details tools required for all dishwasher installations.
Lists optional items that might be useful during installation.
Lists parts that come included with the dishwasher.
Lists additional parts that must be purchased separately.
Lists optional or model-specific parts that may be required.
Steps for preparing cabinet opening with existing utilities.
Steps for preparing cabinet opening with new utilities.
Instructions for connecting a power supply cord to the dishwasher.
Instructions for direct wiring the dishwasher.
Details various methods for connecting the drain hose.
Detailed steps for making the power supply cord connection.
How to measure the cabinet opening for the dishwasher.
Steps to adjust dishwasher wheels and legs for proper fit.
Instructions for using shims with raised floor installations.
Installing a custom panel on top-control models.
Dimensions for custom panels on top-control models.
Marking a line and drilling pilot holes for custom panel attachment.
Attaching the handle to the custom panel.
Attaching the custom panel assembly to the dishwasher door.
Final steps for installing the custom panel.
How to attach the dishwasher to the countertop.
Alternative method for attaching dishwasher to the side cabinet.
Safely standing the dishwasher upright before moving.
Guiding the dishwasher into the cabinet opening.
Verifying the placement of water and drain hoses.
Adjusting door spring tension for proper opening and closing.
Aligning the dishwasher door with the cabinet doors.
Connecting and tightening the 90° elbow fitting to the water valve.
Verifying the water supply connection for leaks.
Steps for connecting the dishwasher drain hose.
Securing the drain hose with a clamp.
Finalizing the drain hose clamp position.
Steps for making a direct wire electrical connection.
Connecting the remaining wires for direct wiring.
Securing the direct wire cable using a strain relief.
Reinstalling the terminal box cover after wiring.
Ensuring the dishwasher is properly aligned in the cabinet.
Preparing dishwasher for securing by removing rack and adding towel.
Fastening the dishwasher securely to the countertop.
Verifying clearances and internal spacing.
Finalizing preparation by reinstalling rack.
Instructions for removing and placing the bottom sound pad.
Reinstalling the dishwasher's access panels.
Verifying panel position and tightening screws.
To Next Page