Jensen 15 SERIES User Manual

9
Installing an Antenna
Use a coaxial cable to connect the wall jack or external antenna to the RF-IN on the LED TV
Press the SOURCE button on the remote control to select TV, then press RIGHT button to confirm.
Then you can receive the ATSC/NTSC signal.
Wall Jack with
F-Connector
Coaxial (Round) Antenna Cable
Analog+Digital 75
User Guide Information
For connecting to ATSC or NTSC broadcast
E gn l hsi

Jensen 15 SERIES Specifications

General

Contrast Ratio	500:1
Response Time	8ms
Speakers	2 x 3W
Brightness	250 cd/m²
Inputs/Outputs	Audio In/Out
VESA Mount Compatible	75mm x 75mm