Jensen AL7000AC - User Manual

To Next Page

Modelno: AL7000AC

This equipment may be operated in all EU and EFTA countries: AT, BE, BG, CY, CZ, DK, EE, FI,

FR, DE, GR, HU, IS, IE, IT, LV,LI, LT, LU, MT, NL, NO, PL, PT, RO, SK, SI, ES, SE, CH, TR, GB

PRODUCT USAGE RESTRICTIONS: This product is intended for indoor use only.

Declaration of Conformity with Regard to EU Directive 1999/5/EC (R&TTE Directive):

Hereby, Jensen Scandinavia AS, declares that this wireless router is in compliance with

the essential requirements and other relevant provisions of Directive 1999/5/EC.

The declaration of confirmity may be consulted at www.jensenscandinavia.com/rtte/

Installation Guide

Internet port

Please connect your

broadband modem

to the internet port.

Power connector

Network ports

Ports for connecting network

devices by cable, such as computer,

Media Server, Network printer

VOIP adapter etc.

USB port

USB port for connecting

a printer or USB hard disk drive.

Reset / WPS*

Reset: Hold for about 10 seconds to

reset AL5000ac to factory default.

WPS: Hold for about to 2-5 seconds

to initiate WPS connection.

* WPS is disabled as default

and needed to be activated in

router GUI (http://192.168.38.1)

beforeuse.

WPS LED

WPS status LED.

WPS LED is

flashing when

setting up a WPS

connection.

2.4GHz LED

LED that show status

for the 2.4GHz network.

The LED will flash when

active.

5GHz LED

LED that show status

for the 5GHz network.

The LED’s will flash

when active.

Network ports LED

Show status for devices

that are connected to

the router by cable.

Internet LED

LED that show

status for the

Internet port.

The LED will flash

when active.

USB LED

Indicates if the

USB port is

correctly

connected.

Sys Led

Displays a

blinking light

when functioning

correctly

Power LED

Displays a solid light

upon powerup

Need help?

Do you have a question about the Jensen AL7000AC and is the answer not in the manual?

Summary

Router Components and Indicators

Status LED Indicators

Details the function and status of various LEDs on the router, including WPS, 2.4GHz, 5GHz, Internet, Network, USB, Sys, and Power LEDs.

Connectivity Ports

Describes the purpose and connection types for the router's power, USB, network, and internet ports.

Reset and WPS Button

Explains the functionality of the Reset button for factory defaults and the WPS button for secure wireless connection.

Connecting the Router

Power and Network Connections

Instructions for connecting the power adapter and the network cable from the modem to the router.

Cable TV Internet Setup

Specific steps for users with internet delivered via cable TV, including device checks and modem resets.

Connecting to Wireless Network

Connecting Devices

Guide on how to search for and connect various devices (PC, Mac, iPhone/iPad, Android) to the router's wireless networks.

Troubleshooting and Support

Common Connection Issues

Solutions for common problems such as 'No access to internet', changing network name, encryption key, or channel.

Customer Support Contact

Information on how to contact customer support via phone or email for setup assistance.

Summary

Router Components and Indicators

Status LED Indicators

Details the function and status of various LEDs on the router, including WPS, 2.4GHz, 5GHz, Internet, Network, USB, Sys, and Power LEDs.

Connectivity Ports

Describes the purpose and connection types for the router's power, USB, network, and internet ports.

Reset and WPS Button

Explains the functionality of the Reset button for factory defaults and the WPS button for secure wireless connection.

Connecting the Router

Power and Network Connections

Instructions for connecting the power adapter and the network cable from the modem to the router.

Cable TV Internet Setup

Specific steps for users with internet delivered via cable TV, including device checks and modem resets.

Connecting to Wireless Network

Connecting Devices

Guide on how to search for and connect various devices (PC, Mac, iPhone/iPad, Android) to the router's wireless networks.

Troubleshooting and Support

Common Connection Issues

Solutions for common problems such as 'No access to internet', changing network name, encryption key, or channel.

Customer Support Contact

Information on how to contact customer support via phone or email for setup assistance.

Overview

Function Description
Key Features and Indicators
Connectivity
Usage Features
Troubleshooting and Maintenance
Technical Specifications (Inferred from context)

The Jensen AL7000AC is a wireless router designed for home and small office network connectivity, offering both 2.4GHz and 5GHz wireless networks, as well as wired Ethernet ports.

Function Description:

The AL7000AC serves as a central hub for your network, allowing multiple devices to connect to the internet wirelessly or via Ethernet cables. It supports the 802.11abgnac Wi-Fi standards, providing high-speed wireless connectivity. The router is pre-configured with network names and passwords, which are located on the top and underside sticker of the device for easy setup.

Key Features and Indicators:

Power LED: A solid light indicates the device is powered on.
Sys LED: A blinking light signifies correct functioning.
Internet LED: Shows the status of the internet port. It flashes when active.
2.4GHz LED: Indicates the status of the 2.4GHz wireless network. It flashes when active.
5GHz LED: Indicates the status of the 5GHz wireless network. It flashes when active.
WPS LED: Flashes when setting up a WPS (Wi-Fi Protected Setup) connection.
USB LED: Indicates if the USB port is correctly connected.
Network Ports LED: Shows the status of devices connected to the router via cable.

Connectivity:

Power Connector: For connecting the power adapter.
Internet Port (Blue): Connects to your broadband modem.
Network Ports (Yellow): Four Ethernet ports for connecting wired network devices such as computers, media servers, network printers, or VoIP adapters.
USB Port: For connecting a printer or a USB hard disk drive, enabling network sharing of these resources.

Usage Features:

Easy Setup: The router comes pre-configured, simplifying the initial setup process. For more advanced configurations, users can access the router's graphical user interface (GUI) via a web browser.
Wireless Connectivity: Supports both 2.4GHz and 5GHz bands, allowing for flexible connections depending on device compatibility and desired speed/range. The 5GHz band offers faster speeds but with a shorter range, while the 2.4GHz band provides wider coverage.
Wired Connectivity: Provides four Gigabit Ethernet ports for stable and high-speed wired connections.
WPS (Wi-Fi Protected Setup): Allows for easy and secure connection of WPS-compatible devices by holding the WPS button for 2-5 seconds. Note that WPS is disabled by default and needs to be activated in the router GUI (http://192.168.38.1) before use.
USB Sharing: The USB port allows users to connect a printer or an external hard drive, making them accessible to all devices on the network.
Router GUI Access: The router's settings can be managed by logging into the web interface at http://192.168.38.1 with the default username "admin" and password "1234". From here, users can:
- Run the "EASY SETUP" wizard.
- Change network names (SSIDs) under the "WIRELESS" menu.
- Modify encryption keys (passwords) under the "WIRELESS" menu.
- Select different wireless channels under the "WIRELESS" menu to optimize performance and avoid interference.
Reset Functionality: The device can be reset to factory default settings by holding the Reset/WPS button for approximately 10 seconds.

Troubleshooting and Maintenance:

No Internet Access: If there is no internet access, users should log into the router GUI, run the "EASY SETUP" wizard, and ensure the broadband modem is properly connected and reset (power off/on, wait 2 minutes).
Changing Network Name/Encryption Key/Channel: These settings can be adjusted through the router's web interface under the "WIRELESS" menu.
Customer Support: Jensen Scandinavia provides customer support via phone in Norway, Sweden, Denmark, and Finland, as well as through email (support@jensenscandinavia.com). A support-id, located on the top and underside sticker, may be required when calling.
Product Usage Restrictions: This product is intended for indoor use only.
Regulatory Compliance: The device complies with EU Directive 1999/5/EC (R&TTE Directive), and the declaration of conformity can be found at www.jensenscandinavia.com/rtte/. It is approved for operation in all EU and EFTA countries.

Technical Specifications (Inferred from context):

Wireless Standards: 802.11abgnac (AC-class router, indicating support for Wi-Fi 5).
Wireless Frequencies: Dual-band (2.4GHz and 5GHz).
Ethernet Ports: Likely Gigabit Ethernet (implied by modern router standards and "network ports").
USB Port: For storage and printer sharing.
Default IP Address: 192.168.38.1
Default Login: Username: admin, Password: 1234

The AL7000AC is a versatile router suitable for users who need reliable wireless and wired connectivity with options for network customization and resource sharing.