How to fix noise or distorted sound on Jensen JCR-232 Alarm Clock?
If your Jensen Alarm Clock produces noise or distorted sound during AM or FM broadcast, first, try to retune the AM or FM broadcast station. For FM, make sure the FM antenna is fully extended. For AM, reposition the unit until the best reception is achieved.
What to do if there is AM or FM no sound on Jensen JCR-232 Alarm Clock?
If you're not getting any sound from your Jensen Alarm Clock on AM or FM, ensure that the unit is in “RADIO” function mode by pressing the corresponding button. Also, check the volume level and increase it if it's set at the minimum.
Why does my Jensen JCR-232 Alarm Clock sound distorted at high volume?
If the sound from your Jensen Alarm Clock appears distorted at a high volume setting, the volume control of the unit may be set too high. Try adjusting the volume control to a lower, more comfortable level.
Essential guidelines for safe operation and preventing hazards like fire or electric shock.
Warnings about opening the unit and handling electrical components to avoid shock.
Instructions for connecting the clock radio to a household AC power outlet.
Guide for installing or replacing the CR2032 lithium battery for power outage backup.
Step-by-step process to set the current time, date, and format.
Detailed steps to configure alarm times, sources (beeper/radio), and weekdays.
Solutions for common problems like no sound, distorted sound, or poor reception.
General| Display Type | LED |
|---|---|
| Alarm Function | Yes |
| Radio | AM/FM |
| Battery Backup | Yes |
| Snooze Function | Yes |
| Alarm Type | Buzzer/Radio |
| Weight | 1.2 lbs |
| Power Source | AC |
To Next Page
