What to do if my Jensen Marine Radio has no power?
If your Jensen Marine Radio has no power, first ensure that the vessel’s +12V switched power source is in the “on” position, assuming the radio power supply is properly connected to it. If it still doesn't work, the fuse may be blown; in that case, replace the fuse.
Why is there no sound coming from my Jensen Marine Radio?
If there is no sound coming from your Jensen Marine Radio, the volume may be too low or the system may be muted. Try adjusting the volume to an audible level. Also, check the wiring connections to ensure they are properly connected.
Why won't the operation keys on my Jensen JMS7010 work?
If the operation keys on your Jensen Marine Radio do not work, make sure the front panel is properly closed. If the issue persists, the built-in microcomputer may not be operating correctly; try pressing the RESET button.
Why does my Jensen Marine Radio CD sound skip?
If the CD sound skips on your Jensen Marine Radio, it could be due to a couple of reasons. First, the installation angle might be more than 30 degrees; adjust it to less than 30 degrees. Second, the disc might be dirty or defective; clean the disc and try playing it again, or use a new disc.
What to do if my Jensen Marine Radio cannot tune to radio station or auto-seek does not work?
If your Jensen Marine Radio cannot tune to a radio station or the auto-seek function isn't working, start by checking the antenna cable to ensure it is connected. If the antenna is connected, the signals may be too weak; try selecting a station manually.
What causes a 'Disc error' on a Jensen JMS7010?
A 'Disc error' on your Jensen Marine Radio can occur for several reasons. You might have inserted the disc upside down, so ensure the label faces upward. The compact disc could be extremely dirty or defective; clean the disc or try a new one. Condensation might also be the issue; leave the player off for about an hour, then try again.
Advises on volume, water, temperature, power supply, and disc handling safety.
Provides notes on compatible discs and proper disc maintenance practices.
Highlights laser product safety and the necessity of professional servicing.
Covers battery disconnection, shipping screw removal, and important notes.
Details the DIN front mount installation and secure wiring procedures.
Presents the unit's wiring diagram and detailed pinout assignments for connections.
Details volume adjustment, muting, and the unit's reset function.
Details how to configure system settings like key beep, display, and clock.
Provides instructions for manually setting and automatically setting the clock.
Details play/pause, preview, repeat, random, and track selection functions.
Addresses symptoms like no power, disc loading errors, and disc errors.
Covers issues with no sound, unresponsive keys, and CD sound skipping.
Helps diagnose problems with tuning to stations and weak signal reception.
General| Type | Marine Radio |
|---|---|
| Tuner | AM/FM |
| Weatherband | Yes |
| Water Resistance | IPX6 |
| Power Output | 50W x 4 |
| Amplifier | Built-in |
| USB Input | Yes |
| Auxiliary Input | Yes |
| Bluetooth | Yes |
| SiriusXM Ready | Yes |
| Display Type | LCD |
| Remote Control | Yes |
| Pre-amp Outputs | Yes |
To Next Page