EN
GENERAL 4
1. EC DECLARATION OF CONFORMITY SHDC 8320 4
2. EC DECLARATION OF CONFORMITY HDC 8230 & HDC 8200 4
3. SPECIFICATIONS 5
4. USER INSTRUCTIONS 5
5. SAFETY INSTRUCTIONS 6
5.1. ILLUSTRATION OF SAFETY INSTRUCTIONS 6
5.2. GENERAL SAFETY INSTRUCTIONS 6
5.3. SPECIFIC SAFETY RULES 8
SUPER HAND DRY CUTTER 8320 10
6. DESCRIPTION 10
7. FUNCTIONAL DESCRIPTION 11
7.1. INTENDED USE 11
7.2. ELECTRICAL CONNECTION 11
7.3. EXTENSION CABLE 11
7.4. SAW BLADE 11
7.5. UNPACKING 11
7.6. INSTALLING THE SAW BLADE 11
7.7. REMOVING THE BLADE 12
7.8. ADJUST CUTTING DEPTH 12
7.9. USE OF SIGHTING NOTCH 12
7.10. BLADE GUARD 12
7.11. DUST COLLECTION SYSTEM 12
8. START AND STOP OF THE MACHINE 13
8.1. SWITCHING THE MACHINE ON AND OFF 13
8.2. ELECTRONIC OVERLOAD PROTECTION AND LOAD INDICATOR LIGHT 13
8.3. USE OF THE MACHINE 13
8.4. CUTTING GUIDE 14
9. MAINTENANCE AND REPAIR 14
9.1. KEEP TOOL CLEAN 14
9.2. REPLACEMENT OF CARBON BRUSHES 14
9.3. STANDARD ACCESSORIES 14
HAND DRY CUTTER 8230N | 8200 15
10. DESCRIPTION 15
11. APPLICATION 16
12. FUNCTIONAL DESCRIPTION 16
12.1. UNPACKING 16
12.2. CARTON CONTENTS 16
12.3. INSTALLING THE BLADE 16
12.4. REMOVING THE BLADE 17
12.5. ADJUSTMENT DEPTH OF CUT 17
12.6. ADJUSTMENT OF BEVEL ANGLE 17
12.7. HOW TO USE THE SIGHTING NOTCH 17
12.8. STARTING AND STOPPING TOOL 17
12.9. REMOVING CHIPS 17
12.10. HOW TO USE THE RIP FENCE 17
12.11. LOWER RETRACTING BLADE GUARD 17
12.12. HOW TO USE THE TOOL 18
12.13. CLAMP THE WORK PIECE 18
13. MAINTENANCE 18
13.1. KEEP TOOL CLEAN 18
13.2. THE CARBON BRUSHES 18
13.3. WARNING 18
13.4. STANDARD ACCESSORIES 18
GENERAL 19
14. QUOTATION 19
15. SPARE PARTS 19
16. WARRANTY 19
TABLE OF CONTENTS
3
To Next Page
Loading...