5-376-000106
REV. 0 - 09/07
8. Fold the underlift up until the align-
ment indicators on the underlift
and on the knee boom match up.
9. CLOSE the underlift lockout valve
located on the tilt/fold cylinder on
the back side of the knee boom..
WARNING:
The underlift must be locked out
to prevent the cable tension from
folding the underlift back into the
knee boom.
10. Raise the knee boom to its fully
elevated position.
11. Position the lower anchor assem-
bly on the ground behind the truck
and turn the “CAM” handles on the
back bars 90°.
Eastern Wrecker Sales Inc
To Next Page
Loading...
Need help?
General
