EasyManua.ls Logo

Jerr-Dan MPL - Towball Hitch Attachment

Default Icon
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Section II: Operation
Page 25
5-376-000102
REV. 1 - 07/10
TOWBALL HITCH ATTACHMENT
The MPL is supplied with a Towball Hitch attachment that will allow you to
recover and tow trailers requiring a tow ball hookup.
DO NO EXCEED THE FOLLOWING RATINGS:
1-7/8 in. Ball:................................5,000 lbs. (GTW)*
2 in. Ball: .....................................5,000 lbs. (GTW)*
2-5/16 in. Ball:..............................7,500 lbs. (GTW)*
50 MM Ball: .................................5,000 lbs. (GTW)*
* Gross Tongue Weight
1. Remove the towball hitch
attachment from the toolbox.
2. Use the bottom set of holes,
install the towball hitch to the
bottom on the underlift boom using
the hitch pins.
3. Secure the hitch pins with the
lynch pins.

Other manuals for Jerr-Dan MPL

Related product manuals