Section II: Operation
Page 31
5-376-000102
REV. 1 - 07/10
Remember, most wire rope failures are caused by cable
crushing or the operator underestimating the pull or over
estimating the wire rope strength.
13. Now slowly retrieve the wire rope,
carefully winding the wire rope
onto the drum. Many operators
take this opportunity to do a
visual inspection. When you’ve
finished rewinding the wire rope,
be sure you don’t overwind it.
Always wear safety glasses and
gloves when doing recovery work
or handling the wire rope.
To Next Page
Loading...
Need help?
General
