Section II: Operation
Page 41
5-376-000102
REV. 1 - 07/10
7. Close the dolly latch by pushing
the top away from you.
8. Install the retaining bolts and
wing nuts or pad locks.
9. After using the dollies, store them
back on the deck in basically the
reverse order. Remove the
retaining bolts and wing nuts or
pad locks and open the latch.
10. Place the axle cross tube rails
back into the storage bracket by
inserting the tab on the end of the
axle tube into the cutout in the
storage bracket.
To Next Page
Loading...
Need help?
General
