7
Dust/swarf collection:
Dust port outside diameter ................. 2-1/2” (63.5mm) ...................... 2-1/2” (63.5mm) ..................... 2-1/2” (63.5mm)
Recommended min. extraction volume ......... 350 CFM ................................. 350 CFM ................................ 350 CFM
Weights:
Net ....................................................... 64 lb (29.20 kg) ..................... 113 lb (51.50 kg) ......................... 176 lb (80 kg)
Shipping .............................................. 70 lb (31.73 kg) ..................... 124 lb (56.60 kg) .................... 208 lb (94.50 kg)
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
4.1 Mounting hole dimensions
Figure 1: IBG-8 hole centers
Figure 2: IBG-10 hole centers
Figure 3: IBG-12 hole centers
To Next Page
Loading...
