Jet JLH Series - Specifications (0.8-2.5 Ton Models); Technical Details

6
Specifications (JLH-80/100/160/250)
Stock
Number Description
Rated
Capcty.
(ton)
Standard
Lift
(ft.)
Min.
Distance
between
hooks (in.)
“A”
No.
of
falls
Load
Chain
Diameter
(mm)
Lift per
full turn
(in.)
Lbs.
Pull
to Lift
capacity
Lever
Length
(in.)
“B”
(in.)
“C”
Overall
width
(in.)
“D”
Hook
Throat
Opening
(in.)
“E”
Net
Wei
g
ht
(lbs)
275050 JLH-80-5 0.8 5 11.02 1 5.6 1.14 63.88 9.6 4.69 5.67 0.93 12.57
275010 JLH-80-10 0.8 10 11.02 1 5.6 1.14 63.88 9.6 4.69 5.67 0.93 12.57
275015 JLH-80-15 0.8 15 11.02 1 5.6 1.14 63.88 9.6 4.69 5.67 0.93 12.57
275020 JLH-80-20 0.8 20 11.02 1 5.6 1.14 63.88 9.6 4.69 5.67 0.93 12.57
375010* JLH-80WO-10 0.8 10 11.02 1 5.6 1.14 63.88 9.6 4.69 5.67 0.93 12.57
210050 JLH-100-5 1 5 11.81 1 5.6 1.14 79.30 9.6 4.69 5.67 1.14 13.1
210010 JLH-100-10 1 10 11.81 1 5.6 1.14 79.30 9.6 4.69 5.67 1.14 13.1
210015 JLH-100-15 1 15 11.81 1 5.6 1.14 79.30 9.6 4.69 5.67 1.14 13.1
210020 JLH-100-20 1 20 11.81 1 5.6 1.14 79.30 9.6 4.69 5.67 1.14 13.1
310010* JLH-100WO-10 1 10 11.81 1 5.6 1.14 79.30 9.6 4.69 5.67 1.14 13.1
215005 JLH-160-5 1.6 5 13.19 1 7.1 0.86 74.89 10.4 4.96 6.26 1.26 17.64
215010 JLH-160-10 1.6 10 13.19 1 7.1 0.86 74.89 10.4 4.96 6.26 1.26 17.64
215015 JLH-160-15 1.6 15 13.19 1 7.1 0.86 74.89 10.4 4.96 6.26 1.26 17.64
215020 JLH-160-20 1.6 20 13.19 1 7.1 0.86 74.89 10.4 4.96 6.26 1.26 17.64
315010* JLH-160WO-10 1.6 10 13.19 1 7.1 0.86 74.89 10.4 4.96 6.26 1.26 17.64
225005 JLH-250-5 2.5 5 14.76 1 8.8 0.60 81.50 10.4 5.90 6.81 1.44 24.7
225010 JLH-250-10 2.5 10 14.76 1 8.8 0.60 81.50 10.4 5.90 6.81 1.44 24.7
225015 JLH-250-15 2.5 15 14.76 1 8.8 0.60 81.50 10.4 5.90 6.81 1.44 24.7
225020 JLH-250-20 2.5 20 14.76 1 8.8 0.60 81.50 10.4 5.90 6.81 1.44 24.7
325010* JLH-250WO-10 2.5 10 14.76 1 8.8 0.60 81.50 10.4 5.90 6.81 1.44 24.7
* Asterisk indicates models with slip clutch overload protection.
NOTE: The above stock numbers are representative; chain is available in other lengths. Specify length when
ordering. Some models are available with point (“shipyard”) hooks; specify when ordering.