EasyManua.ls Logo

Jetboil Genesis - Assembly Instructions; Assembly Safety Warnings; Assembly Steps

Jetboil Genesis
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
• Perform leak checks outside, in a well-ventilated area.
Operate at least 1m/3.3ft away from combustible materials and
ignition sources.
Before each use: Keep stove area clear and free from combustible
materials, gasoline, and other flammable vapors and liquids.
Do not obstruct the flow of combustion and ventilation air to the stove.
Do not use windscreen other than the one provided with this product;
use of another windscreen or outback oven can overheat the fuel
canister, resulting in explosion.
Do not use an appliance which is leaking, damaged or which does not
operate properly.
Always change gas canisters in a well ventilated location away from
any sources of ignition, such as naked flames, pilot, electric heaters/
equipment and away from other people.
Do not install or use Fuel Cylinder in an inverted position
(Reference Fig. 4).
1. Remove packed contents from bag (Fig. 1)
NOTE: Strainer Lid (1.2), 5L Flux Pot (1.3) and 10" Fry Pan (1.5) are
included only with the Genesis Stove System OR sold separately
as accessories.
2. Place latched stove on a flat, level surface, at least 1m/3.3ft away
from any combustible materials or ignition sources.
WARNING
ASSEMBLY

Other manuals for Jetboil Genesis

Related product manuals