TROUBLESHOOTING
13
1. Flame does not extinguish:
Tighten control valve as much as possible. Manually blow out flame.
Once flame is extinguished, immediately detach fuel source. See
your dealer or contact Jetboil for service.
2. Igniter fails to spark:
If stove is wet, igniter may fail to spark. If igniter will not spark, check
positioning of electrode in relation to burner (Fig. 11). If not positioned as
shown in instructions, re-position the electrode accordingly. If igniter
still fails to spark, use matches or a lighter, following instructions
detailed in OPERATING INSTRUCTIONS – Lighting the Burners.
See your dealer or contact Jetboil for service if igniter fails to
spark for any other reason.
3. Continued Issues:
If an issue cannot be corrected using these instructions, see Limited
Warranty on back cover. Contact your local dealer, distributer, or
Jetboil for parts and/or service.
14
Cooking Stove
Instructions — French
To Next Page
Loading...
