SET UP
STEP 1
• Remove Machine from Box and check for
damage
• Check Box contains Gas Hose, Power Lead
and Tool Kit
• Please keep Box for warranty returns
STEP 2
• Ensure white Nylon Washer is in Machine
End of Gas Hose
• Replacement Washers supplied in Tool
Kit, contact JetChill for additional
replacement Washers
STEP 3
• Screw Gas Hose clockwise onto Machine
using adjustable Wrench provided
• Ensure Connection not frosting or making
a hissing sound from Co2 Gas leaking
STEP 4
• Pull Plastic Sleeve by hand to end of Gas
Hose Connection as in NSF splash zone
To Next Page
Loading...