SET UP
STEP 5
• Ensure black Rubber O Ring is in the
Cylinder End of the Gas Hose
• Replacement O Rings supplied in Tool Kit,
contact JetChill for additional replacement
O Rings
STEP 6
• Screw Gas Hose clockwise tight, onto
Cylinder of Food Grade Liquid Co2 with
Eductor / Siphon / Dip Tube, using
Wrench provided
• Open Cylinder valve by hand turning Valve
90 degrees anticlockwise
• Ensure Connection not frosting or making
a hissing sound from Co2 Gas leaking
STEP 7
• Plug Power Lead into Mains and side of
Machine
• LED’s inside Machine light up and close
Lid to check both blue Charge Button
Lights come on
• Machine now ready to prime
STEP 8
• Place two dry JetChill Glasses on Machine
Probes and ensure Glasses locate
correctly on Probe Nipples
• Turn Handle down over Glasses, close Lid
and press NORMAL Charge Button once
to prime Gas through Machine
• Glasses now ready to charge with Dry Ice
To Next Page