Jets GWT800PL User Manual

Grey Water Interface Unit 12L
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. GWT800PL
Doc. Rev.: 2 (2019-06-17)
1
Jets™ Grey Water Interface Unit consists of a tank fitted with a level
switch and a discharge valve. Grey water is led to the tank by gravity
and interfaced with the vacuum system via the valve. The valve is
activated by the water level inside the tank.
Technical Data
........................................
Tank Type Interface Unit/Buffer Tank Assembly
..................................
Outside Dimensions 400 x 200 x 473 mm (LxWxH)
.................................................................................
Weight Approx. 4 kg
..................................................................................
Generic Material PE
....................................................................................
Color Range White
...............................................................................
Tank Volume 12 Litres
...........................................
Discharge Volume 4 Litres at 30% Vacuum
4.5 Litres at 55% Vacuum
............................................................................
Inlet Diameter - Ø50mm
..................................
Discharge Valve Outlet Outside diameter Ø 50 mm
.....................
Note: Values may vary depending on selected components
Disclaimer
Note: Our products and services are offered and sold subject to Jets
Vacuum AS’ General Sales Conditions, copies of which will be
furnished upon request. Information provided herein is solely for
information purposes, does not constitute any warranty or
representation of any kind and is subject to change without notice.
We strive to reproduce product colors reasonably accurate. Without
prior written approval, this document or any part of may not be
reproduced in any form. Jets™, Vacuumarator™, Helivac™, VC™,
VOD™, CVS™ and Softsound™ are trademarks and/or registered
trademarks of Jets. © Jets AS. All rights reserved.
Components
1
|
Grey Water Tank 12L, plastic
....................................
080500026*
2
|
Tank/Pipe Seal, ø50mm
............................................
034505310*
3
|
Pipe Bend, ø50mm 90dg
..........................................
034512584*
4 |
Suction Pipe
..............................................................
034512700*
5
|
Bracket
......................................................................
010100750*
6
|
Screw, 4x20
..............................................................
036515607*
7 |
Screw, M5x10
...........................................................
036531600*
8
|
Nut, M5
.....................................................................
036304802*
9 |
VD Valve, Piston Complete
.......................................
054100955*
10
|
Level Switch
...............................................
see product selection
* Component/s avaliable as replacement parts.
Accessories
Construction Characteristics
Rubber Elbow, ø50 w/Hose Clip
.............................................
034505450
Rubber Sleeve, ø50 w/Hose Clip
...........................................
034505550
Air/Overflow Valve, Complete
.................................................
035202511
Level Switch
...........................................................................
032803900
Rubber Elbow, ø50/ø60 w/Hose Clip
.....................................
034512802
Rubber Sleeve, ø50/ø60 w/Hose Clip
....................................
034512902

Jets GWT800PL Specifications

General

Brand	Jets
Model	GWT800PL
Category	Water Pump
Language	English

Summary

Technical Data

Disclaimer

Dimension Drawings

Function and Principle

Normal Position: Closed Valve

Describes the system's state when the valve is closed.

Emptying Sequence

Details the step-by-step process for emptying the tank.

Closing Sequence

Outlines the sequence of events for closing the valve and stopping flow.

Chemicals and Detergents

Provides guidance on the use of chemicals and detergents with the unit.

Important Health and Safety Information

Personal Protective Equipment

Guidelines for wearing appropriate PPE, including gloves and goggles.

Hazardous Conditions

Covers risks from gas from organic matter and potential disease from effluent.

General Safety Notices

General warnings, cautions, and notices for installation, use, and maintenance.

Delivery, Receipt of Goods and Transportation

Storage

Installation to End Use

Pre-Installation

Standards and Regulations

Requirements for installation, including industry-specific standards and regulations.

Tools and Training

Details the tools and training required for product installation.

Installation

Inlet and Outlet Connections

Describes interchangeable connections for inlet, air/overflow, and outlet.

Optional Connections

Optional connection points for Level Alarm High (LAH) and VTS-VIP Controller.

Slope

Service and Maintenance

Routine Cleaning

Recommendations for cleaning the unit to prevent deposits and maintain performance.

Frequency

Recommended frequency for routine inspection and cleaning of the unit.

Technical Assistance

Information on obtaining technical assistance for service and maintenance.

Disassembly Instructions

Assembly Instructions

Scheduled Maintenance

Troubleshooting