14
Your Jetson Beam Scooter folds up conveniently to store away easily in the
trunk of a car, in a closet, or to carry with you onto a train or bus!
Step 1 Open the Quick Release Lever and slide the expandable handlebar all
the way down. Once it’s completely stored away, lock the Quick Release Lever.
Step 2 Pull the Folding T-bar Latch out, and pull the handlebars out to the side.
Push one handlebar down at a time, and press in until they are fully stored.
Once both handlebars are folded down, bring the Folding T-bar Latch back to
its original position.
Step 3 Open the Folding Lock Lever and press the Release Button. Fold the
handlebar down towards the rear wheel until you hear a “click.” Once it’s fully
folded, close the Folding Lock Lever to secure.
Press Release Button
Fold Handlebar Down Towards Rear Wheel.
Listen For “Click” Sound.
Close Folding Lock Lever.
Open Folding Lock Lever
FOLDING YOUR JETSON BEAM
SAFE DRIVING
1. Get to know the Jetson Beam before driving it. Test your control over it.
Make your turns slowly and cautiously, and give yourself stopping distance.
2. Your driving capability - to gain control over your scooter, practice your rst
ride on the Jetson Beam in an open space with no obstacles to disturb you.
3. Recommended tires pressure in back tire: 28 psi
PLEASE NOTE: Make sure to ll the tire with air before your rst ride. Riding on
a partially lled tire will cause it go at and it will need to be replaced.
To Next Page
Loading...
Need help?
General
