Jetson Light Rider 20 User Manual

15
4. LIFT THE BIKE UPRIGHT AND ROTATE THE FRONT FORK SO THAT ONE FORK LEG IS ON THE LEFT SIDE AND ONE FORK LEG
IS ON THE RIGHT SIDE OF THE BIKE.
5. PROP THE BIKE UPRIGHT SO THAT IT IS RESTING ON THE REAR WHEEL AND FRONT FORK.
6. ROTATE THE BRAKE CALIPER SO THAT IT IS ALIGNED WITH THE FRONT FORK.
7. PLACE THE WHEEL SUCH THAT THE FOLLOWING CONDITIONS ARE MET:
· THE TOP OF THE FRONT WHEEL IS IN BETWEEN THE FRONT FORK LEGS AND THE CALIPER ARMS
· THE ROTATION ARROW ON THE TIRE IS IN BETWEEN THE CALIPER AND POINTED FORWARD
· BOTH SIDES OF THE WHEEL AXLE FIT INTO THE WEDGES OF THE FRONT FORK LEGS.
FRONT FORK
DIRECTIONAL
MARKING ON TIRE
BRAKE CALIPER
AXLE
WASHER

Jetson Light Rider 20 Specifications

General

Brand	Jetson
Model	Light Rider 20
Category	Bicycle
Language	English