2. FOLLOW THE MANUFACTURE'S INSTRUCTIONS ON YOUR
AIR PUMP TO INSERT AIR INTO THE TIRE. CHECK PERIODICALLY
WITH A GAUGE AND CONTINUE ADDING AIR UNTIL YOU REACH 36 PSI.
• TO USE THE TIRE VALVE STEM EXTENSION HOSE (INCLUDED WITH SOME MODELS):
FINGER TWIST THE LARGER END OF THE HOSE ONTO THE TIRE VALVE, AND THEN
ATTACH YOUR AIR PUMP INTO THE OTHER END OF THE HOSE.
IMPORTANT: ONLY USE A MANUAL AIR PUMP TO INFLATE THE TIRES ON YOUR BIKE.
NEVER USE AN AIR COMPRESSOR; DOING SO MAY CAUSE THE TIRE TUBES TO POP.
3. REMOVE THE AIR PUMP AND TIRE VALVE STEM EXTENSION HOSE, IF USING FROM THE VALVE.
TIRE VALVE STEM
EXTENSION HOSE
SOME MODELS
To Next Page
Loading...
