4. LIFT THE BIKE UPRIGHT AND ROTATE THE FRONT FORK SO THAT ONE FORK LEG IS ON THE LEFT SIDE AND ONE FORK LEG IS
ON THE RIGHT SIDE OF THE BIKE.
5. PROP THE BIKE UPRIGHT SO THAT IT IS RESTING ON THE REAR WHEEL, TRAINING WHEELS, AND FRONT FORK.
6. CAREFULLY LIFT THE FRONT OF THE BIKE FRAME UP. SIDE THE FRONT WHEEL IN BETWEEN THE LEGS OF THE FRONT FORK
SO THAT THE ROTATION ARROW IS AT THE TOP OF THE WHEEL AND POINTED FORWARD.
7. PLACE ONE OF THE REMOVED WASHERS ONTO EACH END OF THE AXLE WITH THE HOOK CURVED INWARD AND ALIGNED
WITH THE WASHER HOOK HOLE IN THE FORK LEG. PUSH THE HOOK INTO THE HOLE.
WASHER HOOK HOLE
FRONT FORK
DIRECTIONAL
MARKING ON TIRE
AXLE
WASHER
To Next Page
Loading...
Need help?
General
