The Jetson Litho X All-Terrain Hoverboard is a personal electric mobility device designed for recreational use. It is an all-terrain hoverboard, suggesting it can handle various surfaces beyond smooth pavement. The device is manufactured in Yueyang, China, and imported by Jetson Electric Bikes LLC.
Important Technical Specifications:
- Max Speed: Up to 10 MPH
- Max Range: Up to 10 miles on a single charge
- Battery: 36V, 2.0Ah Lithium-Ion
- Motor: 400W
- Climbing Angle: Up to 15°
- Product Weight: 13.6 lb
- Tire Size: 6.3"
- Product Dimensions: L24.2" × W7" x H7.4"
- Charger: UL Listed, 100-240V
- Charge Time: Up to 5 hours
- Weight Limit: 220 lb
- Recommended Age: 12+
- Models: JLITHX-GRY, JLITHX-PUR, JLITHX-OS-GRY, JLITHX-OS-PUR
Usage Features:
Getting Started:
- Charging the Battery: Only the included UL Listed charger should be used. The charger should be plugged into the wall first, then into the hoverboard's charging port. The Litho X should not be turned on while charging. A full charge takes up to 5 hours. The charger has an indicator light: red for charging and green for charge complete.
- Indicator Lights: The hoverboard features both a Battery Indicator Light and a Status Light.
- Battery Indicator Light: Shows the remaining battery percentage:
- Status Light: Indicates the hoverboard's operational status:
- All lights on: Your Litho X is all set.
- Red lights on: Recalibrate your Litho X.
- Safety Precaution (Low Battery): If the battery charge depletes to 10% or less:
- If riding on an incline, the hoverboard will automatically power off.
- If riding on a flat surface, the hoverboard will begin beeping, and a low battery charge announcement will be made through the speaker.
- Recalibration: To recalibrate the hoverboard:
- Place the turned-off Litho X on a flat surface.
- Hold the power button for 5 seconds until a tune is complete. The Litho X will then be on.
- Let go of the power button, then press it again to turn the Litho X off.
- Turn the Litho X back on; recalibration is now complete.
- It is crucial to keep the hoverboard leveled and still throughout the recalibration process.
Riding the Hoverboard:
- The manual illustrates three riding positions: Neutral, Turn Left, and Turn Right. These positions likely correspond to how the rider shifts their weight to control movement.
- Turning the Lights On:
- The default lighting mode displays when the Litho X is powered on.
- A short press of the power button cycles through 5 different light patterns.
- A long press of 2 seconds powers the Litho X on/off.
Safety Warnings (Comprehensive):
- Pre-Operation Checks: Before each use, ensure all guards and pads are in place and serviceable, the braking system functions properly, axle guards and chain guards are in place, tires are in good condition (inflated properly, sufficient tread), and the operating area is safe.
- Maintenance: Components should be maintained and repaired according to manufacturer specifications, using only authorized replacement parts installed by skilled persons.
- Battery Safety: Do not recharge non-rechargeable batteries.
- Body and Clothing: Keep hands, feet, hair, body parts, clothing, or similar articles away from moving parts, wheels, or the drive train while the motor is running.
- User Restrictions:
- Not for unsupervised children or persons with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, unless supervised or instructed (IEC 60335-1/A2:2006).
- Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
- Adult supervision is required.
- Rider weight should not exceed 220 lb.
- Prohibited Maneuvers: Do not operate for racing, stunt riding, or other maneuvers that may cause loss of control or uncontrolled actions.
- Environment:
- Never use near motor vehicles.
- Avoid sharp bumps, drainage grates, and sudden surface changes (scooter may suddenly stop).
- Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris (wet weather impairs traction, braking, and visibility).
- Avoid riding around flammable gas, steam, liquid, or dust.
- Visibility: Units without headlights should only be operated with adequate daylight conditions. Owners are encouraged to use lighting, reflectors, and signal flags for conspicuity.
- Health Conditions: Persons with heart conditions, pregnant women, head/back/neck ailments, or mental/physical conditions that impair safety recognition/understanding should be cautioned not to operate.
- Riding Practices:
- Do not ride at night.
- Do not ride after drinking or taking prescription medication.
- Do not carry items while riding.
- Never operate barefooted.
- Always wear shoes and keep shoelaces tied.
- Ensure feet are securely placed on the deck.
- Always use appropriate protective clothing, including a helmet (with certification), knee pads, and elbow pads.
- Give way to pedestrians.
- Be alert to surroundings.
- Avoid distractions (e.g., phone use) while riding.
- The product cannot be ridden by more than one person.
- Group Riding: Maintain a safe distance from other riders to avoid collisions.
- Turning: Maintain balance when turning.
- Brakes:
- Improperly adjusted brakes are dangerous.
- Brakes may become hot; do not touch with bare skin.
- Applying brakes too hard or suddenly can cause loss of control and falls.
- Adjust loose brakes with a hexagon wrench or contact Jetson Customer Care.
- Parts: Replace worn or broken parts immediately.
- User Understanding: The owner must ensure operators understand and can operate all components before use.
- Training and Terrain: Do not ride without proper training, at high speeds, on uneven terrain, or on slopes. Do not perform stunts or turn abruptly.
- Indoor Use: Recommended for indoor use.
- Environmental Exposure: Prolonged exposure to UV rays, rain, and elements may damage enclosure materials; store indoors when not in use.
California Proposition 65 Warning:
- This product can expose you to chemicals including Cadmium, known to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Modifications:
- Do not attempt to disassemble, modify, repair, or replace any components without instruction from Jetson Customer Care, as this voids the warranty and can cause injury.
Additional Operation Cautions:
- Do not lift the product off the ground while it is on and wheels are in motion, as this can cause injury from spinning wheels.
- Do not jump on or off the product, or jump while using it.
- Keep feet firmly planted on the footrest while in operation.
- Always check the battery charge before using.
Motor Overload Warning:
- When the hoverboard is pushed beyond its intended capacity, motors are susceptible to overloading.
- If motor overload is approached, the hoverboard may beep as an alert, and one or both sides may enter protection mode and automatically power off.
- In cases of overload, allow the motor to cool for 30-60 minutes before riding again.
- To avoid overloading the motor, refrain from riding:
- On high-resistance surfaces (carpet, rough/rocky terrain).
- Up steep slopes.
- With a carrying weight exceeding 200 lb.
- Over bumps, steps/curbs, or uneven ground.
Helmet Safety:
- Always ensure the forehead is covered by the helmet. An exposed forehead could cause serious injury.
Maintenance Features:
Riding Range Factors:
- The maximum range is 10 miles, but actual range is affected by:
- Driving Surface: Smooth, flat surfaces increase distance.
- Weight: More weight means less distance.
- Temperature: Ride, store, and charge the Litho X above 50°F.
- Maintenance: Timely battery charging increases driving distance.
- Driving Style: Frequent starting and stopping reduces driving distance.
Cleaning the Litho X:
- Wipe carefully with a damp cloth, then dry with a dry cloth.
- Do not use water to clean the Litho X, as electrical and electronic systems may get wet, leading to personal injury or malfunction.
- If electric parts or the battery get wet, do not power on the Litho X and contact Jetson Customer Care.
Battery Care:
- Keep away from fire and excessive heat.
- Avoid intense physical impact and/or severe vibration.
- Protect from water or moisture.
- Do not disassemble the Litho X or its battery.
- Contact Jetson Customer Care for any battery issues.
Storage:
- Fully charge the battery before storing.
- The battery should be fully charged once a month thereafter.
- Cover the Litho X to protect against dust.
- Store the Litho X indoors, in a dry place.
Compliance:
- FCC Rules: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received.
- Modifications: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
- Interference: The equipment has been tested and found to comply with Class B digital device limits. If interference occurs, users are encouraged to reorient/relocate the receiving antenna, increase separation between equipment and receiver, connect equipment to a different circuit, or consult a dealer/radio/TV technician.
- Shielded Cables: Shielded cables must be used with this unit to ensure compliance with Class B FCC limits.
The Jetson Litho X All-Terrain Hoverboard is designed to provide an enjoyable riding experience, emphasizing safety through detailed warnings and maintenance guidelines.
Need help?
General
To Next Page
