Jetson Magma

14
HOLD POWER BUTTON
FOR 5 SECONDS
FOLLOW THESE 3 SIMPLE STEPS:
1. POWER OFF THE HOVERBOARD. PLACE IT ON A FLAT SURFACE AND, IF NECESSARY, TILT THE FOOTBEDS SO THEY
ARE ALIGNED AND PARALLEL TO THE GROUND.
2. HOLD THE POWER BUTTON FOR 5 SECONDS. RELEASE THE BUTTON AFTER YOU HEAR A SHORT MUSICAL TUNE.
3. LONGPRESS THE POWER BUTTON TO TURN THE MAGMA OFF.
4. QUICKPRESS THE POWER BUTTON AGAIN TO TURN IT BACK ON. RECALIBRATION IS NOW COMPLETE.
* KEEP THE HOVERBOARD LEVELED AND STILL THROUGHOUT THE RECALIBRATION PROCESS.
* DO NOT LEAN OR APPLY ANY WEIGHT ON THE HOVERBOARD WHILE RECALIBRATING.
* YOU MAY HAVE TO REPEAT THE PROCESS UP TO THREE TIMES TO FULLY RECALIBRATE YOUR HOVERBOARD.
1.6 Recalibrating
YOUR HOVERBOARD'S INTERNAL BALANCE MECHANISMS SOMETIMES NEED TO BE RESET, OR "RECALIBRATED."