4. CLOSE THE STEM CLAMP LATCH AND TIGHTEN THE KNOB BY
TURNING IT CLOCKWISE.
5. CHECK THAT THE HANDLEBAR IS SECURE.
IMPORTANT: THE STEM PIN ALONE WILL NOT KEEP THE STEM
SECURE. MAKE SURE THE STEM CLAMP IS TIGHTENED AND CLOSED
BEFORE RIDING.
TROUBLESHOOTING: IF YOU CANNOT OPEN OR CLOSE THE LATCH,
THE KNOB ON THE CLAMP MAY BE TOO TIGHT. LOOSEN THE KNOB ½
ROTATION AT A TIME UNTIL YOU CAN UTILIZE THE LATCH.
STEM CLAMP LATCH
KNOB
STEM CLAMP
*AS VIEWED FROM
RIDING POSITION.
To Next Page
Loading...
Need help?
General
