*Adults must assist children in the initial adjustment procedures of the product.
1. Get Started
1.1 Charging the Battery
• Only use the included charger
• Plug the charger into the wall before the Charging Port
• Don’t turn on the Plasma while it’s charging
• Charge the battery until it is fully charged - up to 3 hours
Indicator Light
1.2 Indicator Lights
Status
Light
1.3 How to Recalibrate
Follow these 3 simple steps...
1. Place the Plasma on a flat, level surface and hold still.
2. Hold the Power Button (for about 5 seconds) until you are notified
of a successful recalibration.
3. Restart the Plasma by turning it off and then on.
Hold for 5 seconds
Warning: The Plasma will automatically tilt up and slow down once
the battery power goes below 10% as a safety precaution.
Status Light: If these lights turn red or if you are having issues with
the Plasma, you may need to recalibrate it.
0-9% 20-49%10-19% 50% +Percentage
Battery
Indicator Light
-blinking
- Charging
- Charge Complete
To Next Page
Loading...
