• LEVEL THE SEAT AND HOVERBOARD BEFORE CONNECTING THE SEAT WIRE TO THE HOVERBOARD'S CHARGING PORT.
• MAKE SURE SIDE OF HOVERBOARD WITH CHARGING PORT IS FACING OUT.
• CONNECT THE REAR SEAT WIRE TO THE HOVERBOARD’S CHARGING PORT.
• POWER ON THE HOVERBOARD THE LIGHTS WILL TURN ON ONCE THE HOVERBOARD AND THE SEAT
WIRE ARE PLUGGED IN.
• THE DEFAULT LIGHTING MODE WILL DISPLAY WHEN THE REMIX AND HOVERBOARD ARE BOTH CONNECTED
AND POWERED ON.
• SHORT PRESS THE POWER BUTTON TO SWITCH BETWEEN DIFFERENT LIGHTING EFFECTS.
PLEASE NOTE: THE CONNECTOR SHOULD ALWAYS BE CONNECTED WHILE RIDING.
1.11 Turning the Lights On
REAR SEAT WIRECHARGING PORT
To Next Page
Loading...
