Need help?Do you have a question about the Jetter JM-203B-230 and is the answer not in the manual?
Details personnel demands for different product life cycle phases.
States no modifications are permitted; unauthorized changes void liability.
States repairs must be done by Jetter AG; device is maintenance-free.
Instructs to separate from mains during malfunctions and report damages.
Details earthing requirements, including double earthing for leakage current.
Warns about high operating voltage and hot surfaces.
Warns about dangerous voltages in capacitors after power is switched off.
Provides instructions for mounting, clearance, and fixing the device.
Details checks for motor/amplifier assignment, voltage, wiring diagrams, and EMC.
Lists checks for wiring, connections, and protective measures.
Reiterates hazards of high voltage and precautions for installation.
Highlights safety precautions before energizing, including reattaching protective equipment.
Lists rated voltage, power supply, tolerance, overload protection, and motor output.
Explains the I²t calculation for motor power loss and its parameters.
Details UL standard criteria for motor overload detection.
Specifies terminal X1, cable specs, and 3-phase connection details.
Provides guidance on connecting the motor, including general remarks and specifications.
Details connector X62, cable specs, shielding, and wiring diagram for motor connection.
Lists ordering info for mating connectors and cable assemblies for motor power.
Lists error numbers, types, descriptions, responses, and troubleshooting steps.
States safety requirements for the Safe Standstill feature circuit.
Provides step-by-step instructions for testing the Safe Standstill function.
Outlines safety requirements based on standards like EN ISO 13849-1.
Describes OSSD control and signal waveforms accepted by the system.
Provides a block diagram of the device with the Safe Standstill option.
To Next Page
General
