Need help?Do you have a question about the Jetter JM-204-480 and is the answer not in the manual?
General safety regulations and user responsibilities.
Demands on personnel for safe handling at each product life cycle phase.
Identifies potential hazards associated with the device.
Detailed steps for physically mounting the servo amplifier.
Procedures for correct electrical connections and EMC compliance.
Critical safety precautions during installation, especially regarding high voltage.
Specifies environmental parameters like temperature and humidity for operation and storage.
Details electrical safety parameters like protection class and dielectric strength.
Comprehensive electrical parameters including voltage, current, and protection.
Overview of the three protection methods for the motor.
Details on terminal specifications and connecting cables for power supply.
General remarks and important measures for connecting the motor.
Specifications for digital inputs and logic power supply connections.
Lists error codes, their descriptions, and troubleshooting steps.
Explains how to interpret and handle alarms indicated by a flashing dot on the display.
Describes the functionality of the optional analog input card.
Provides technical specifications for the analog input.
Enables addressing the JetMove via Ethernet instead of the system bus.
Methods for assigning an IP address to the JetMove.
Safe de-energising of the motor for personal safety and preventing restart.
Safety requirements for the Safe Standstill function according to EN standards.
Procedures for testing the Safe Standstill function after installation or maintenance.
Technical data for the EnDat 2.2 encoder input.
Technical data for the SSI encoder input.
Technical data for the incremental encoder input.
Lists available documents for download from Jetter AG.
Table summarizing available options and their corresponding page references.
To Next Page
General
